Screen Printed Transfers

Following a similar process to screen printing with the use of a meshed screen, your graphics are printed onto a heat transferable paper. An adhesive powder is added to the final color to Crystallise the ink and allow for Application onto your medium. Each Color of your design is printed separately on individual screens therefore resulting in a single or multicolored print. All Multi-Color prints require a Clear adhesive ink to bind those colors together the adhesive powder is added to this clear adhesive. Most single color prints can have the adhesive powder applied directly and does not require the Clear adhesive ink.

Colours will need to be seperated and printed individually and vectored artwork is by far the best and easiest artwork to work with. Check our design and artwork specs on the link below, for pricing and ordering send your artwork to Us with a bit of information such as:

• Size of prints required
• Quantity of prints required
• Material and colour they would be branded on

We require vector artwork, AI, CDR, EPS, or PDF. Our preference is CDR. Please convert fonts to curves/paths or supply font files with your order. Vectored artwork is by far the best and easiest artwork to work with however, it is not possible with photographs are highly toned/ gradient filled graphics. If your supply Bitmap artwork, acceptable formats are JPG & TIF and most other common pixel based extensions. All Bitmap images must be at least 300 DPI at your requested print size. Check our design and artwork specs on the link below for more information.

• Set machine temp. To 165C
• Prepress garment for 5 seconds.
• Remove White beaded cover from transfer
• Place the transfer in position on the garment.
• Apply heat for 5-8 seconds, using light/ med.
• Cool for 1-2 seconds (maximum) then remove the backing paper .
• Repress using a teflon cover sheet for 3-4 seconds

Pricing is determined on the number units required. Please fill out the quote form on the right to get a fully inclusive quote.